SF65 HSW Technical

Dimensions

Manufacturer recommend panel widths do not exceed 1200mm and a maximum height of up to 3000mm. Heights greater than this can be achieved; please contact our technical department for advice.

Profile

The Sunflex 65 is manufactured from triple-laminated solid timber sections. These sections have been stabilised at stress points and bonded back together with opposing grains, which creates added strength whilst preventing warping and twisting.

Track options

The top suspended track and rail can be concealed within the ceiling and is therefore entirely without the need of a bottom track, with only floor press stud sockets to accommodate the shootbolt locking rods, leaving an uninterrupted floor surface, bottom track option available if required.

Security

The standard locking system offers a very high level of security, with a quick, smooth and easy operation. Each panel incorporates a bottom shootbolt mechanism which is concealed within the framework and operated by an internal flush handle. The shootbolt rods are manufactured in aluminium and linked by a corrosion resistant cam. They are capped with glass fibre reinforced polyamide cones to prevent any damage.

When closed each panel interlocks with its neighboring panels by the means of tongue and groove molded connecting blocks and continuous gasket seals. All systems are internally glazed as standard for improved security.

Key locking can be integrated in the first opening panel or lead door with a five-lever profile cylinder, this can be fitted to either the inside only or both internally and externally as required, additional locks can be added at every handle point for higher security

Weather stripping

The top and bottom seals consist of twin nylon brush piles giving an effective seal. The double gasket seals between the door panels are continuous and of superior quality (consisting of long lasting EPDM).

Operating System

A top running system with an operating mechanism that consists of double horizontal stainless steel polyamide coated wheels with maintenance free sealed ball bearings providing continued quiet, quick and easy, smooth operation and a long life.

Appearance

The natural character of wood is perfectly preserved by using Sikkens micro-porous water based wood stains (i.e. they contain no harmful solvents) in a variety of stain colours. Or alternatively the timber can be paint finished to any RAL colour (over 201 RAL colours available) or different colours or woodstain to the inside and outside. As standard Sunflex timber door systems are fully finished which consists of one basecoat and two topcoats; other finishes are available upon request.

Complete System

Designs can be customised according your preference - the options include mid-rails, mullions, plant-on bars with dummy spacer grids, deeper top and bottom profiles and solid in-fill panels, among many others.

Glazing

The system is internally glazed and can accommodate glazing ranging from 4mm clear toughened glass up to a sealed unit of 38mm. Our standard 28mm unit comprises of 4mm clear toughened glass with Low 'e' to the inner pane x 20mm argon gas cavity x 4mm clear toughened glass to comply with building regulations for safety and thermal efficiency. All units are BS kite marked, manufactured to BS6206A and BS5713 standards.
IDSystems offer a wide choice of glazing options, including manual or electrical internal venetian or pleated blinds which can be incorporated inside the glazed unit. These are very popular, especially on internally opening systems where curtains are not practical.